JLink Piso WiFi Guide
Up: Piso WiFi Platforms · Related in Platforms: LPB Guide · AdoPiSoft Guide
Answer first: JLink is a commercial Piso WiFi system reported in operator and professional listings, with a dashboard view of machines and a Main and Sub licence structure. Reported suggested retail prices are about 500 pesos for a Main licence and about 200 pesos for a Sub licence — reported, not verified current official prices. Verify licence coverage, duration and renewal, dashboard fields, and pause and payment behaviour in writing, and by testing, before you buy.
JLink is a commercial Piso WiFi system reported in operator and professional listings, with a dashboard view of machines and a Main and Sub licence structure. This guide explains what is reported about JLink, what is not verified, and what to check in writing before you buy.
This guide is not an official JLink manual, and no complete official JLink feature page was verified for this guide at the time of writing. Treat licence prices, dashboard fields, and feature claims below as reported in listings, not as current official terms. Check the current official JLink page and your supplier’s written offer before you pay. For a side by side comparison, see the Platforms Compared pillar. For admin steps in general, see the Admin Login guide.
What JLink Is, in Plain Terms
JLink is a Piso WiFi platform that operators use to run one or more machines, with a dashboard that helps an owner see machine status without visiting each machine in person. Customers still join a WiFi network, open a captive portal, pay by coin, voucher, or a supported digital payment, and browse for a timed session. The dashboard is an owner tool, not a customer feature, and it does not change the basic customer flow.
JLink is newer and less widely documented in this niche than LPB, AdoPiSoft, PisoFi, and JuanFi. That means a buyer should ask more questions, not fewer, and should not treat a listing, a marketplace post, or a single dashboard screenshot as a complete feature list.
Main and Sub Licences: What the Reports Say
Operator and professional listings report a Main licence and a Sub licence structure for JLink. Reported suggested retail prices in listings are about 500 pesos for a Main licence and about 200 pesos for a Sub licence. Those figures are reported, not verified current official prices, and licence pricing changes with promotions, tiers, and suppliers.
Do not use those figures as a budget until you have a written quote for your exact case. Ask the supplier, in writing:
- What does a Main licence cover: one machine, one location, or one account, and how many users or machines are included?
- What does a Sub licence cover, and how is a Sub machine linked to a Main machine or account?
- How long does each licence last, what happens at expiry, and what is the renewal price?
- Does the licence include updates, support, or both, and for how long?
- If a machine is replaced, moved, or reset, does the licence move with it, or do you need a new licence?
If a supplier cannot answer those questions in writing, treat the offer as incomplete, even if the price looks low. A cheap licence that does not cover your machines, or that expires without warning, costs more than a clear licence with a higher upfront price.
Dashboard: What to Check, Field by Field
Listings report a JLink dashboard showing machine ID, online or offline status, version, and temperature. Those fields are useful, but only if they are accurate for your machines and you actually check them. Before you buy, ask for a dashboard demonstration, or a clear written list of fields, and test each field during a trial if one is offered.
| Dashboard field reported | What it helps you do | What to test before you rely on it |
|---|---|---|
| Machine ID | Identify which machine a customer or a sales record refers to | Whether each machine has a stable ID after a restart, a move, or a reset |
| Online or offline status | See whether a machine is reachable without visiting it | How quickly status updates, and whether offline means power loss, internet loss, or dashboard loss |
| Version | Know which firmware or software version a machine is running | Whether the version shown matches the version in the machine admin panel |
| Temperature | Spot a machine that may be overheating in an outdoor box | Whether temperature is measured on the board, in the box, or not at all on your hardware, and what reading should trigger a visit |
A dashboard does not fix a machine. It tells you where to look. If a machine shows offline, you still need a plan for who visits it, what they check first, and what proof they record, as explained in the Troubleshooting pillar and the Machine Setup post.
Pause, Payment, and Portal Behaviour: Verify, Do Not Assume
No complete JLink pause, payment, or portal behaviour was verified for this guide, so this guide does not state a JLink pause model, a JLink payment list, or a JLink admin default. Do not assume LPB, AdoPiSoft, or PisoFi behaviour applies to JLink, and do not assume a default username or password from another platform applies to JLink. Check your own machine documentation and admin panel for its portal address, admin path, pause toggles, payment modes, and admin credentials, and change the admin password on first login, as explained in the Admin Login guide and the Default Passwords post.
Test the following as a customer, with a small payment, before you open a JLink machine to the public:
- Coin payment, if offered, and whether time is credited correctly for each denomination.
- Voucher payment, if offered, and whether expiry, device limits, and error messages are clear.
- Digital payment, if offered, and whether a failed payment leaves a clear record for the operator to check.
- Pause and resume, if offered, including pause on the same device, pause after a short disconnect, and what happens when a pause limit is reached.
- Session end behaviour, including what the customer sees when time runs out, and whether a new payment starts cleanly.
If any test fails, fix it with the supplier before you advertise that feature. A dashboard that looks good while payment or pause fails will not keep customers.
Who JLink Suits, and Who Should Wait
JLink suits an operator who wants a dashboard view of machines, who will check that view regularly, and who verifies licence terms first. It suits a small multi machine operator who needs to know, at a glance, which machine is online, which version it runs, and which machine needs a visit.
It is a weaker choice for a buyer who needs a complete, verified feature list before purchase, a fixed licence price in writing, or a long documentation history to compare against. If you cannot get those items from the official page or supplier, compare LPB, AdoPiSoft, and PisoFi first, using the Platforms Compared pillar, and return to JLink only when the written terms are clear.
Questions to Ask a JLink Supplier Before You Buy
- What are the current official Main and Sub licence tiers, prices, durations, and renewal terms, in writing?
- What dashboard fields are included in the licence I will buy, and are any fields limited to a higher tier?
- What are the pause rules, payment options, and admin paths on the current version for the hardware I will receive?
- How are updates delivered, can they be scheduled, and can they be rolled back if pause or payment breaks?
- What support is included, how do I contact support, and what happens if a machine goes offline and I cannot fix it remotely?
- If I move, replace, or reset a machine, what happens to its licence and its sales records?
Frequently Asked Questions About JLink
What is a JLink Main licence, and what is a Sub licence?
Listings report a Main licence and a Sub licence structure, with reported suggested retail prices of about 500 pesos for Main and about 200 pesos for Sub. Those prices are reported, not verified current official prices. Ask the supplier, in writing, what each licence covers, how long it lasts, and what happens at renewal, before you budget for either one.
What does the JLink dashboard show?
Listings report machine ID, online or offline status, version, and temperature. Verify each field on a demonstration or trial, and test whether status, version, and temperature match the machine admin panel, because a dashboard field that is wrong is worse than no field at all.
Is JLink the same as LPB, AdoPiSoft, or PisoFi?
No. JLink is a separate commercial system reported in operator listings. Do not assume its pause rules, payment options, admin path, or defaults match another platform. Check your own JLink documentation and admin panel for those details.
Should I buy JLink for a first machine?
Only if you have the written licence, dashboard, pause, payment, and support terms, and you have tested payment and pause on the exact version you will run. Otherwise, a platform with longer documentation, such as LPB or AdoPiSoft, may be easier to compare and support for a first machine.
Can JLink help me run several machines?
A dashboard can help you see status across machines, but it does not replace site visits, rate checks, pause tests, and sales reconciliation. For multi machine planning in general, see the Sub Vendo Expansion post and the Business pillar, and test the JLink dashboard with your actual machines before you rely on it.
Where do I get official JLink terms?
From the current official JLink page and from your supplier, in writing. Do not treat a marketplace listing, a social media post, or a single dashboard screenshot as official terms, because licence prices and features change.
What to Read Next
For a side by side comparison, go to the Platforms Compared pillar. For admin steps in general, go to the Admin Login guide, and for the canonical defaults table, go to the Default Passwords post, while remembering that JLink defaults must be checked on your own machine, not copied from another platform. For multi machine expansion, go to the Sub Vendo Expansion post. For update safety, go to the Software Update guide.