Piso WiFi Default Admin Passwords: Quick Reference by Platform, Change First

This is the canonical quick reference for Piso WiFi default admin usernames and passwords. It is written for an owner who needs the table fast, not for a reader who needs the full admin login walkthrough. Full admin login steps, first login checklist, and settings paths are in the Admin Login guide. Customer login steps are in the Login pillar. This post does not repeat those walkthroughs. It gives the table, the verification warnings, and the change first rules.

A default password is a starting point set by a platform or supplier, not a guarantee for your machine. A previous owner may have changed it, a supplier may have set a custom password before delivery, and a newer build may use a different default from an older build. If a default below does not work, do not keep guessing. Check the sticker, manual, supplier documentation, and password manager first, then contact the supplier. Repeated guessing can lock an account on some systems.

Default Admin Credentials Table

Use this table only while connected to the machine network, through the admin panel address for that machine, normally 10.0.0.1/admin where that gateway applies. Do not enter these credentials on any public website, third party app, or support page that asks for them. A real supplier check happens through the supplier’s own channel, not through a random login form.

Platform and build	Username	Password	How to verify it for your machine
LPB Piso WiFi	admin	123456789 in the TP-Link guide; some operator reports give 12345678 or admin	Defaults vary by build and version. Check the machine sticker and manual first, and change the password on first login. Never treat any single value as universal.
AdoPiSoft, older builds	admin	admin	Older builds only. Check the build version shown on your machine or panel before assuming this row applies.
AdoPiSoft, newer builds	administrator	admin1234; some operator reports give admin123	Newer builds only, and reports vary. If the older row fails, check whether your build is a newer build, rather than assuming the password is lost.
PisoFi	administrator	admin12345	Check PisoFi related guides, the machine sticker, and supplier documentation. Verify against your own machine, because supplier setups vary.
JuanFi	Varies by build	Varies by build; some operator reports give admin	No single default across JuanFi builds. Check the operator setup notes for that specific build.
Ruijie and SmartFi	Varies by supplier and firmware	Varies by supplier and firmware	Check supplier documentation for that system and firmware version. Do not trust a single list for newer systems.
JLink	Varies by supplier and firmware	Varies by supplier and firmware	Check supplier documentation, including Main and Sub licence setup notes, for that system.
1Click	Varies by supplier and firmware	Varies by supplier and firmware	Check supplier documentation set at install. No universal default is claimed for this system.
WiFi5Soft	Varies by supplier and firmware	Varies by supplier and firmware	Check supplier documentation for that system. Verify current official terms before relying on any listed default.
Generic builds, reported in operator discussions	admin	admin, reported for some generic builds only	Do not assume this row applies to a named platform. Check the sticker, manual, and supplier for your own build, and change it on first login.

If your platform is not listed, or your build shows a different username field, treat the supplier documentation as the source of truth. Do not copy a default from a seller page, a video comment, or a copied guide without checking it against the supplier or the machine itself.

Why Platforms Ship With Defaults at All

Defaults exist so a new machine can be set up before an owner creates a personal password. The supplier, installer, or first owner is expected to change the default during first setup. That expectation is the weak point. If first setup is rushed, or if a machine is resold without a proper handover, the default can stay in place for months, and anyone who connects to the machine network and knows the public default can open the admin panel.

That risk is why this post is titled change first. A default is not a secret. LPB, AdoPiSoft, and PisoFi defaults in the table above are widely reported in guides. Treat them as public knowledge, and change them on first login, even if you plan to change other settings later. A machine left on a default is not a minor oversight. It is an open admin panel.

Change on First Login: The Minimum Safe Sequence

This section is a short safety sequence only. Full first login steps, including backup and customer testing, are in the Admin Login guide.

1. Log in with the correct default for your platform and build, from the machine network only.
2. Go to the admin or profile settings and change the admin password first, before changing rates, WiFi name, or pause rules.
3. Choose a strong password that you have not used elsewhere, and that is not a shop name, a machine name, a phone number, or a simple sequence.
4. Save, log out, and log back in with the new password to confirm it works, before you leave the machine.
5. Store the new password in a password manager or another safe place that only authorised owners can access. Do not write it on a note stuck to the machine, on the portal sign, or in a shared chat.
6. If you manage several machines, use a different admin password for each machine. If the platform supports co-admin accounts with limited permissions, use those for staff, rather than sharing the main admin password.

If you cannot change the password because the panel will not save, stop and check the save problem before making other changes. A panel that will not save can leave settings in a mixed state. Back up settings first if the panel still allows it, and follow the Admin Login guide for save problems and storage checks.

Strong Password Rules for Admin and WiFi Passwords

Admin passwords and WiFi passwords serve different purposes, and changing one does not change the other. The admin password protects settings. The WiFi password, where a machine uses one, protects network joining. Change both where both exist, and do not reuse the same password for both.

A strong admin password should be long, unique to that machine, and free of personal details. Use a mix of upper and lower case letters, numbers, and symbols where the panel allows them, and avoid dictionary words alone, shop names, dates of birth, and phone numbers. A password manager makes a long unique password practical, because you do not need to remember it or write it on paper.

For WiFi passwords, use a password that customers can type without too many errors, but that is not the shop name, the machine name, or a simple sequence. If a WiFi password is shared on a public sign, remember that it is a shared password, not a secret, and that the admin password must still be strong and private. Never put the admin password on the same sign as the WiFi password or rates.

Staff access should follow the same rule. Staff who only need to check sales or print vouchers should use a co-admin account with limited permissions where the platform offers it, as PisoFi does. Staff who leave should have their co-admin access removed, and the main admin password should be changed if a staff member who knew it leaves under unclear circumstances.

What to Do When a Default Does Not Work

A failed default does not always mean the password is lost. Work through these checks in the order given, before considering a reset.

First, check typing. Usernames and passwords are case sensitive on many panels. Check for capital letters, extra spaces, and a WiFi password or voucher code entered by mistake in the admin fields. Second, check the build. An AdoPiSoft older default will fail on a newer build, and a newer default will fail on an older build. Third, check the machine sticker, manual, supplier invoice, and password manager. Many failed logins are a password stored in the wrong place, not a lost password. Fourth, check whether a previous owner, installer, or staff member changed the password and did not hand it over. Fifth, contact the supplier with platform, version, and machine details, and follow the supplier reset procedure for that platform.

Do not use a password guessing tool, do not try a long list of defaults from the internet, and do not enter admin credentials into a third party app that promises to unlock the panel. Those actions can lock an account, expose credentials, or install unwanted software. If a reset becomes necessary, full recovery steps, including backup first and what a factory reset wipes, are in the separate post on forgetting an admin password, linked in What to Read Next.

Frequently Asked Questions About Default Admin Passwords

Where can I find the exact default for my own machine?

Start with the table in this post for your platform and build, then check the machine sticker, manual, and supplier documentation. Supplier documentation wins if it differs from a general guide, because suppliers can set a custom password before delivery.

Does changing the WiFi password also change the admin password?

No. They are separate passwords for separate purposes. The WiFi password controls joining the network where one is used. The admin password controls settings in the admin panel. Change both where both exist, and do not reuse the same password for both.

Should shop staff know the main admin password?

No, in the usual case. Use a co-admin account with limited permissions where the platform offers it, for sales checks or voucher printing. Share the main admin password only with authorised owners, and change it when a person who knew it leaves.

What if my machine was bought second hand and the default does not work?

Ask the previous owner or seller for the current password and for handover notes, including platform, version, licence details, and any custom setup. If that is not possible, contact the supplier with proof of ownership if required, and follow the supplier reset procedure. Do not assume a general default will work on a resold machine.

Is it safe to leave a default in place if the machine is in a trusted shop?

No. A shop is a public place for customers, and anyone who connects to the machine network can try a public default. Trust in the location does not protect a panel left on a default. Change the admin password on first login, regardless of location.

How often should I change the admin password?

Change it on first login, when staff who knew it leave, after a supplier visit where the password was shared, and after any suspected unauthorised access. There is no need to change a strong, unique, safely stored password on a fixed weekly schedule, but a regular security check, as in the Admin Login guide, should confirm that the password is still private and that co-admin accounts are still correct.

Can I use the same admin password for all my machines to make management easier?

That is easier, but it is riskier. If one machine password is exposed, every machine using the same password is exposed. Use a different password per machine, stored in a password manager, or use co-admin accounts where the platform supports them, with the main password kept only by authorised owners.

What to Read Next

If you forgot an admin password and need recovery steps, go to the post on forgetting a Piso WiFi admin password: Forgot Admin Password. If you need full admin login steps, first login checklist, and settings paths by platform, go to the Admin Login guide. If you need customer login steps, go to the Login pillar. If you want to compare platforms before choosing a system, go to the Platforms Compared guide. If the admin panel will not load or settings will not save, go to the Troubleshooting guide. This post stays a quick reference, so those pages remain the authority for their own steps.